2006 Dodge Pickup
Mileage
124,088
Service Date
4/13/2021
Services Performed
- HOOKED UP SCANNER AND TEST DROVE WITH TWO TECHS. WHILE MONITORING 02 SENSOR DATA FOUND ERRATIC SIGNALS. CAME BACK TO SHOP AND FOUND THAT 02 SENSORS CONNECTORS WERE CROSSED BETWEEN UP STREAM AND DOWN STREAM. PLUGGED IN CORRECTLY AND TEST DROVE AGAIN. STILL GETTING ERRATIC SIGNALS. REPLACED ALL 4 SENSORS, TEST DROVE AGAIN AND FUEL TRIM DATA LOOKS GOOD. RUNS BETTER BUT WILL SET P0300 AT HIGH THROTTLE ANGLE. TECHNICIAN DID EXHAUST BACK PRESSURE TEST – LESS THAN .5 PSI (CONVERTERS NOT PLUGGED). DID COMPRESSION TEST : ALL GOOD BETWEEN 135-180 PSI. NEXT DID CYLINDER LEAK DOWN TEST : SHOWED 6 CYLINDERS WITH NEAR 40% LEAKDOWN GOING PAST THE RINGS. ENGINE IS NEARING END OF SERVICE LIFE. NEXT CHECKED MECHANICAL TIMING OF TIMING CHAINS : THIS ENGINE HAS NO CAM SENSOR ON THE DRIVER SIDE BANK, COMPUTER CANT SEE WHERE TIMING IS ON THIS BANK. UPON CHECKING MECHANICAL TIMING WE FOUND THE DRIVERS SIDE CAM GEAR OFF ONE TOOTH. REMOVED SPROCKET AND ADJUSTED TIMING, ROLLED MOTOR OVER AND RECHECKED. ENGINE IN TIME NOW. TEST DROVE VEHICLE AND RUNS GOOD AND UP SHIFTS AS IT SHOULD.
- PERFORM DIGITAL VEHICLE INSPECTION. PROVIDE CUSTOMER WITH EMAIL REPORT AND SERVICE WRITER CONSULTATION REGARDING INSPECTION.
DAN M. gave our service a 5 star review on 4/15/2021
